Proxxon Micro Woodturning Lathe DB 250

MICRO Woodturning Lathe DB 250

Powerfull, high torque drive with variable speed 1,000 - 5,000rpm.Stable lathe-bed made of thick aluminum profil material. Ball bearing spindle is bored through at 13/32" (10mm). Tailstock with quill travel. Alternatively clamping the work piece with collets. A set of six collets in sizes 2 - 3 - 4 - 6 - 8 and 10mm (5/64" - 1/8" - 5/32" - 15/64" - 5/16" - 13/32") is included.

 PX37020

• For series production of small parts
• Square carrier with back centre and 13/32" (10mm) shaft
• Stable tool rest is adjustable in all directions
• Six collets 5/16", 1/8", 5/32", 15/64", 5/16", 13/32" (2 - 3 - 4 - 6 - 8 - 10mm) are included
• Face plate (for turning larger work pieces) are included

Be Advised :
Other accessories sold separately

Five piece HSS chisel set

A high quality set with the most frequently used turning tools: gouge, skew, parting tool, beading tool and scraper. Neatly packed in a wooden box.

PX27023

Independent four jaw chuck for the DB 250

Individually adjustable jaws. Used to clamp asymmetrical pieces such as rectangles. The reversible jaws clamp from (1.5 - 35mm) (inside) and from 14 - 67mm (outside). The DB 250 headstock spindle of thread M16 x 1 screws directly into the chuck.

PX27024

Drill chuck with sliding sleeve for the tailstock of the DB 250

Clamps up to 13/64" (5.0mm). Is inserted on the spot of the rotating back centre. The feed movement results from sliding the complete tailstock.

PX27026